Ordering guide

BLANKOM BFR-01

Select BFR-01 for one tuner and one fibre. Use BFR-02 for two tuner paths where two fibres are available.

At a glance

Connections and equipment

Signal path · One fibre · One receiver · Receiver-powered

BLANKOM BFM-1732C – 32-port optical satellite multiswitch

System diagram

Optical satellite subscriber lines in an apartment building

Technical overview

The connected tuner sends 13/18 V for polarisation, 0/22 kHz for the low/high band and DiSEqC for the satellite position into the outlet’s coaxial F output. The outlet relays the commands upstream at 1310 nm. The BFM-1732C receives them at its optical subscriber port, selects the requested SAT-IF path and sends it downstream at 1550 nm.

Typical applications

Use one outlet at a single TV position in an apartment or hotel room. The fibre run ends beside the receiver so the final connection remains a short coaxial lead.

System selection

Select BFR-01 for one tuner and one fibre. Use BFR-02 for two tuner paths where two fibres are available.

Optical satellite distribution from a common headend to several houses

BLANKOM BFR-01 Application Diagram

Technical specifications

Inputs 1 × SC/APC
Outputs 1 × F, 75 Ω
Satellite IF range 950–2150 MHz
Terrestrial RF range 47–870 MHz
Optical directions 1550 nm downstream / 1310 nm upstream
Maximum optical input 2 mW
Power supply From the connected satellite receiver
Dimensions 73 × 46 × 33 mm
Operating temperature −15 … +40 °C

Technical data applies to the stated model.

Engineering FAQ

Where does the LNB selection command originate?

The tuner applies 13/18 V, 0/22 kHz and DiSEqC to the F output. BFR-01 transports those commands to the headend through the optical return channel.

What should be specified for a quotation?

Select BFR-01 for one tuner and one fibre. Use BFR-02 for two tuner paths where two fibres are available.