RF over Fiber
BPF-44/BFR-44


Ordering Guide
BLANKOM BPF-44/BFR-44
The system is listed as BPF-44/BFR-44. Specify BFT-44 for the optical transmitter and BFR-44 for the optical receiver.
At a Glance
- Inputs — BFT-44 transmitter: 4 × F, 75 Ω, from one Quattro LNB.
- Outputs — Four independent SC/APC fiber links. BFR-44 receiver: 4 × F, 75 Ω, SAT-IF.
- Features — One satellite position · four independent optical paths
- Ordering guide — The system is listed as BPF-44/BFR-44. Specify BFT-44 for the optical transmitter and BFR-44 for the optical receiver.
Transmitter and Receiver


System Diagram

Technical Overview
The transmitter accepts the vertical-low, vertical-high, horizontal-low and horizontal-high LNB outputs. Each feed has its own SC/APC optical connection at both ends. The transmitter has a die-cast outdoor enclosure and the receiver is installed indoors.
Model comparison
| Catalog system | Satellite positions | Fibers | Transmitter optical output |
|---|---|---|---|
| BPF-11-4/BFR-11 | 1 | 1 | 4 mW |
| BPF-11-8/BFR-11 | 1 | 1 | 8 mW |
| BPF-41-4/BFR-41 | 4 | 1 | 4 mW |
| BPF-41-8/BFR-41 | 4 | 1 | 8 mW |
| BPF-44/BFR-44 | 1 | 4 | 2–5 mW |
Typical Applications
Headend installation
Connect a Quattro LNB at the dish to a multiswitch in another building. Carry each SAT-IF feed on its own fiber and reconnect the four recovered feeds to the matching multiswitch inputs.
Optical link planning
Four. Each low- or high-band polarization has its own fiber between the BFT-44 and BFR-44.
BLANKOM BPF-44/BFR-44 Application Diagram
Technical Specifications
| Transmitter / receiver | BFT-44 / BFR-44 |
|---|---|
| SAT-IF band | 950–2150 MHz |
| Transmitter RF input | 4 × F, 75 Ω |
| Optical link | 4 × SC/APC, 1310 nm |
| Transmitter optical output | 2–5 mW (configuration-dependent) |
| Maximum optical input, BFR-44 | 2 mW |
| Receiver RF outputs | 4 × F, 75 Ω |
| Installation | Transmitter outdoors, receiver indoors |
Specifications may change. Check the optical input range and the loss budget for the selected configuration.
Engineering FAQ
How many fibers does one satellite position require?
Four. Each low- or high-band polarization has its own fiber between the BFT-44 and BFR-44.
Which transmitter goes with this system?
The BPF-44/BFR-44 catalog system uses the BFT-44 transmitter specified in the ordering guide and data sheet.











