BLANKOM12-input SDI encoder and DVB-T modulator

HDM-12220T

HDM-12220 series front panel (HDM-12220C shown)

Ordering Guide

BLANKOM HDM-12220T

Specify HDM-12220T for twelve SDI inputs and DVB-T output. Specify the tuner option and whether AC-3 stereo encoding is required.

At a Glance

Front and Rear Panels

HDM-12220 series front panel (HDM-12220C shown)
HDM-12220 series rear panel with 12 SDI inputs (HDM-12220C shown)

System Diagram

HDM-12220 – System signal path

Technical Overview

DATA1 accepts UDP/RTP transport streams. The multiplexer combines selected IP services, locally encoded SDI programmes and services from the tuner. DATA2 distributes the resulting MPTS alongside the RF output.

Typical Applications

RF distribution

Feed terrestrial receiver networks with local studio or event channels. Choose DVB-T-compatible receivers for the 8 carrier outputs.

Hybrid RF/IP headend

Use DATA2 to pass the same multiplexes to an IPTV distribution stage. Monitor or forward a single multiplex at the ASI output.

Model Comparison

Model Configuration
HDM-12220A 8 × ATSC
HDM-12220C 16 × DVB-C
HDM-12220I 6 × ISDB-T
HDM-12220T 8 × DVB-T

BLANKOM HDM-12220T Application Diagram

Technical Specifications

Reference Value
SDI sources 12 SDI, up to 1080p50/60 input
IP inputs on DATA1 Up to 256 UDP/RTP transport streams
Video encoding H.264/AVC 0.8–19 Mbit/s · MPEG-2 1–19 Mbit/s · CBR/VBR
Video formats Up to 1080p25/30 or 1080i50/60 output
Audio MPEG Layer II, MPEG-2/4 AAC, AC-3 pass-through. Optional AC-3 stereo encoding.
RF modulation EN 300 744 · 8 × COFDM
Output frequency 50–960 MHz
Transport stream outputs 8 × MPTS (IP) · 1 × ASI
Chassis 19″ · 1U · 482 × 440 × 44 mm
Operating temperature 0–45 °C

Specifications are subject to change without prior notice. Confirm supplied hardware, firmware and PSU configuration.

Engineering FAQ

How many streams can DATA1 receive on the HDM-12220T?

The DVB-T configuration accepts up to 256 IP input streams. Its 8 RF multiplexes are also available as 8 MPTS on DATA2.

Does the unit have a specified end-to-end delay?

Latency depends on codec, GOP structure and receiver buffering. For a live venue, verify the assembled signal path using the intended receiver.