8-SDI Encoder and DVB-C Modulator
HDM-08220C


Key features
BLANKOM HDM-08220C
Order HDM-08220C for eight SDI inputs and DVB-C RF output. Specify the tuner type and any AC-3 encoding requirement.
At a Glance
Front and Rear Panels
Family example shown on the HDM-12220C. This order code has eight SDI inputs.


Signal path
- Input sources — 8 HD-SDI inputs; up to 512 UDP/RTP IP streams; 1 DVB-C tuner (ATSC tuner optional).
- Output multiplexes — 16 DVB-C RF carriers, 16 parallel IP MPTS and one selectable MPTS on ASI.
Technical Overview
The eight SDI inputs accept local contribution feeds. The encoder compresses video as H.264 or MPEG-2. The multiplexer combines these services with selected tuner programmes and incoming transport streams. DATA1 accepts up to 512 UDP/RTP inputs for this configuration. DATA2 carries the outgoing multiplexes.
Set the encoder bitrate for each source, assign services to the output multiplexes, and select the RF channel plan. The ASI output can carry one of those multiplexes to a downstream device.
Typical Applications
Receiver network and RF plan
Combine locally produced channels and services from IP into a cable television lineup. Allocate programmes across the 16 QAM carriers to suit the cable network and receiver channel plan.
RF and IP distribution
A parallel IP feed lets a second headend or monitoring receiver use the multiplex without demodulating the RF signal.
Model Comparison
| Model | Configuration |
|---|---|
| HDM-08220A | 8 SDI inputs · 8 ATSC carriers · up to 256 IP inputs |
| HDM-08220C | 8 SDI inputs · 16 DVB-C carriers · up to 512 IP inputs |
| HDM-08220I | 8 SDI inputs · 6 ISDB-T carriers · up to 192 IP inputs |
| HDM-08220T | 8 SDI inputs · 8 DVB-T carriers · up to 256 IP inputs |
BLANKOM HDM-08220C Application Diagram
Technical Specifications
Input and encoding
- SDI inputs — 8 × HD-SDI
- IP inputs — Up to 512 UDP/RTP streams on DATA1
- Video encoding — H.264 at 0.8–19 Mbps or MPEG-2 at 1–19 Mbps, CBR/VBR.
- Video format — Input up to 1080p50/60; output up to 1080p25/30 or 1080i50/60.
- Audio — MPEG Layer II, MPEG-2/4 AAC; AC-3 pass-through; optional AC-3 2.0 encoding.
RF and transport-stream output
- RF standard — DVB-C
- RF carriers / IP multiplexes — 16 / 16
- RF tuning range — 50–960 MHz
- IP / ASI output — 16 parallel MPTS on DATA2; one selected MPTS on ASI.
- Modulation — EN 300 429 · ITU-T J.83 A/B · 5–7 MSym/s
Installation and ordering
- Installation — 19″ · 1U · 482 × 440 × 44 mm
- Operating temperature — 0…+45 °C
- Supply — 110 V ±10 % / 220 V ±10 %, 50/60 Hz
- Ordering code — HDM-08220C
Specifications are subject to change without prior notice. Confirm supplied hardware, firmware and PSU configuration.
Engineering FAQ
Can the RF and IP services run together?
Yes. The HDM-08220C delivers the 16 DVB-C multiplexes over RF and IP in parallel. The ASI port mirrors one selected multiplex.
Which options should I specify when ordering?
Specify HDM-08220C, the required input tuner, and whether AC-3 stereo encoding is needed. Video latency also depends on codec, GOP and receiver settings.




