Ordering guide

BLANKOM BMM-1716

Specify the satellite positions, terrestrial feed and the input assigned to each destination. For receiver-controlled optical subscriber lines, select the BFM-1732C system.

At a glance

Connections and equipment

Connect the LNB trunks and terrestrial feed at the headend, then use the Ethernet web interface to assign sources to receiver, analyser or downstream distribution inputs. The web interface also reports relative RF levels and LNB supply status.

System diagram

BMM-1716 matrix routing principle

Technical overview

A qualitative RF-level display and LNB power monitoring help identify missing input feeds before reassigning outputs. The two redundant supplies support a headend built for continuous operation.

Typical applications

In a headend, change the source feeding an IRD through the web interface. For parallel monitoring, assign the same source to the programme receiver and a spectrum analyser. Several distribution stages can then use independently assigned inputs.

System selection

Specify the satellite positions, terrestrial feed and the input assigned to each destination. For receiver-controlled optical subscriber lines, select the BFM-1732C system.

BMM-1716 RF routing in a headend

BLANKOM BMM-1716 Application Diagram

Technical specifications

Inputs 16 × SAT-IF + 1 × terrestrial
Outputs 16 × F, 75 Ω
Satellite IF range 950–2150 MHz
Web management RJ45, 100BASE-T
Maximum SAT output level 98 dBµV
LNB supply per trunk 15 V DC / max. 500 mA
Power supply Two redundant power supplies
Rack mounting 19″ / 1U
Dimensions 482.6 × 310 × 44.5 mm
Operating temperature 0 … +55 °C

Technical data applies to the stated model.

Engineering FAQ

Can one source feed several outputs?

Yes. Assign the same RF input to each required output in the web interface. The remaining outputs keep their own assignments.

What should be specified for a quotation?

Specify the satellite positions, terrestrial feed and the input assigned to each destination. For receiver-controlled optical subscriber lines, select the BFM-1732C system.