BLANKOM Dual optical SAT outlet for two receivers

BFR-02

BLANKOM BFR-02 – Dual optical SAT outlet for two receivers

Ordering guide

BLANKOM BFR-02

Select BFR-02 for two independently controlled coaxial outputs and allow for two SC/APC fibres. BFR-01 serves one tuner on one fibre.

At a glance

Connections and equipment

Signal path · Two fibres · Two receiver outputs · Independent return paths

BLANKOM BFM-1732C – 32-port optical satellite multiswitch

System diagram

Optical satellite subscriber lines in an apartment building

Technical overview

The connected tuner sends 13/18 V for polarisation, 0/22 kHz for the low/high band and DiSEqC for the satellite position into the outlet’s coaxial F output. The outlet relays the commands upstream at 1310 nm. The BFM-1732C receives them at its optical subscriber port, selects the requested SAT-IF path and sends it downstream at 1550 nm.

Typical applications

At a dual-tuner recording position, run each tuner input to its own F connector. The two optical paths also suit two separate receivers sharing the same installation point.

System selection

Select BFR-02 for two independently controlled coaxial outputs and allow for two SC/APC fibres. BFR-01 serves one tuner on one fibre.

Optical satellite distribution from a common headend to several houses

BLANKOM BFR-02 Application Diagram

Technical specifications

Inputs 2 × SC/APC
Outputs 2 × F, 75 Ω
Satellite IF range 950–2150 MHz
Terrestrial RF range 47–870 MHz
Optical directions 1550 nm downstream / 1310 nm upstream
Maximum optical input 2 mW
Power supply From the connected satellite receiver
Dimensions 73 × 100 × 33 mm
Operating temperature −15 … +40 °C

Technical data applies to the stated model.

Engineering FAQ

Can two tuners choose satellite paths independently?

Yes. Each tuner uses its own F output, optical connection and headend port. The two paths can request different satellite positions or polarisation bands.

What should be specified for a quotation?

Select BFR-02 for two independently controlled coaxial outputs and allow for two SC/APC fibres. BFR-01 serves one tuner on one fibre.