BLANKOM BFT-44 four-path optical transmitter and BFR-44 receiver for one Quattro LNB.

Ordering Guide

BLANKOM BPF-44/BFR-44

The system is listed as BPF-44/BFR-44. Specify BFT-44 for the optical transmitter and BFR-44 for the optical receiver.

At a Glance

  • Inputs — BFT-44 transmitter: 4 × F, 75 Ω, from one Quattro LNB.
  • Outputs — Four independent SC/APC fiber links. BFR-44 receiver: 4 × F, 75 Ω, SAT-IF.
  • Features — One satellite position · four independent optical paths
  • Ordering guide — The system is listed as BPF-44/BFR-44. Specify BFT-44 for the optical transmitter and BFR-44 for the optical receiver.

Transmitter and Receiver

BLANKOM BFT-44 – Optical transmitter
BLANKOM BFR-44 – Optical receiver

System Diagram

BLANKOM BPF-44/BFR-44 – System wiring example

Technical Overview

The transmitter accepts the vertical-low, vertical-high, horizontal-low and horizontal-high LNB outputs. Each feed has its own SC/APC optical connection at both ends. The transmitter has a die-cast outdoor enclosure and the receiver is installed indoors.

Model comparison

Catalog system Satellite positions Fibers Transmitter optical output
BPF-11-4/BFR-11 1 1 4 mW
BPF-11-8/BFR-11 1 1 8 mW
BPF-41-4/BFR-41 4 1 4 mW
BPF-41-8/BFR-41 4 1 8 mW
BPF-44/BFR-44 1 4 2–5 mW

Typical Applications

Headend installation

Connect a Quattro LNB at the dish to a multiswitch in another building. Carry each SAT-IF feed on its own fiber and reconnect the four recovered feeds to the matching multiswitch inputs.

Optical link planning

Four. Each low- or high-band polarization has its own fiber between the BFT-44 and BFR-44.

BLANKOM BFR-44 – Optical receiver

BLANKOM BPF-44/BFR-44 Application Diagram

Technical Specifications

Transmitter / receiver BFT-44 / BFR-44
SAT-IF band 950–2150 MHz
Transmitter RF input 4 × F, 75 Ω
Optical link 4 × SC/APC, 1310 nm
Transmitter optical output 2–5 mW (configuration-dependent)
Maximum optical input, BFR-44 2 mW
Receiver RF outputs 4 × F, 75 Ω
Installation Transmitter outdoors, receiver indoors

Specifications may change. Check the optical input range and the loss budget for the selected configuration.